Cut the narrow loops of the chain-link fence that connect to the fasteners of the posts, hold the grid and remove all the fasteners from top to bottom. You can lay the fence net directly on the ground, when you get to the gate, carefully detach the net fence. Keep the gate leaves for the fence in the backyard at this stage. Starting from the last fence post, turn the mesh cover into one neat cylinder, returning to the first load-bearing fence post. If the fence exceeds a length of 100 meters, it is necessary to divide the grid into 25-meter rolls, in order to facilitate the transfer. Use metal pliers to separate the wire.
DISASSEMBLY OF BRACKET PILLARS
The load-bearing pillars were probably filled with concrete when the fences were being built. This solution is necessary for high-quality fastening of a fence in the earth. You need to soak the ground around the concrete foundation of each pillar. It is worth loosening only two or three pillars at a time. If the pillars are short and thin, you can use a shovel to dig on wet ground, which loses its hardness, allowing you to reach the concrete base. You can pull out the posts using a shovel as a lever. If the fence posts are high enough and exceed a height of two meters, you should contact a loader to help you pull the post to the specified location. Another option may be to rent specialized equipment designed to remove the poles. Such devices can be rented from suppliers of heavy equipment and manufacturers of fences. This is a powerful device with a metal core that will effortlessly help you pull out the pole.
Remove the concrete foundation
Before disposing of the columns, you must remove the concrete foundation. To do this, just rent a jackhammer and gently use it in brick and concrete mode, around the pole. Use a hand hammer and chisel to gently remove the concrete from the surface close to the column.
If the grid is in good condition, you can use it elsewhere.
