Dispelling stereotypes that attitudes are difficult. If you get acquainted with the detailed steps and have a minimum number of tools, which almost always have in the garage of any owner, then business is as easy as shelling pears. Professional advice will help you save on installation, do it yourself with high quality and firmly and make a contribution to the long-term safety of an area with a beautiful appearance.
What you need to know about the Euroshtaketnik in the first place is that the structure has variations. They are installed both in one row at the desired interval, and tightly to each other with a checkerboard, so that no one looks through their personal territory. The difference in installation is obvious, respectively in one or two rows at the desired distance. With the correct selection of the necessary materials by the manager, there will be no problems.
Let's talk more specifically about the stages. The installation process takes place in six steps.
- The first step is to mark and clean the area. It is necessary to thoroughly clean the place under the fence from debris and vegetation. Next, we take accurate measurements and lay the pegs. It is recommended to install the pillars no further than a distance of 2.5 m for structural strength.
- The second step is to drill holes for the supports using an automatic drill or shovel. It is advisable to additionally use crushed stone when digging holes before concreting, especially in the case of installation on sandy and loose soil. The depth of the wells for the pillars is on average from 50 to 70 cm, and the diameter is about 30 cm.
- The third step is to install the pillars. You need to start the installation from the corner posts, and if the site is on uneven ground, then at the place of the height difference. Pour the pillars with a mixture of concrete, gravel and sand and leave for 2 days.
- The fourth step is to weld the lags to the support posts. The process must be executed strictly horizontally using a building level. Transverse logs are welded with screws to match the fence in 2 or 3 rows, depending on the height of the fence. For this, a welding machine is used. It should be borne in mind that the lower attachment line should be at a distance of half a meter from the soil surface, and the upper one - about 20-30 cm below the highest point of the pillar.
- The fifth step is to mount the stubs. The accessory is important so that water does not penetrate inside and rust does not prematurely appear.
- The sixth step is the final one. It consists of the direct installation of strips to the previously erected frame using self-tapping screws. A screwdriver or drill is used for work. Why this way? Because this is a quick method that does not require special equipment and does not affect the appearance of the integral structure.
If you do not have the necessary equipment, then the professional team of Grid West will gladly come to your aid. It is here that you can get acquainted with the assortment of fences https://sitkazahid.com/en/landing/metal-fence/ , buy a turnkey fence, or read the instructions with a photo for self-assembly.
