At first glance, the installation of a fence is a complicated procedure, but if you understand the details, carefully study the step-by-step instructions, then the procedure is not so intricate, in fact, it is possible for a person without experience in the construction business.
What is the easiest fence to install? Metallic from a mesh https://sitkazahid.com/en/catalog/panels/c289 , and not, as you might think, from corrugated board. Why this material? After all, the installation method consists of only two main stages: the installation of the posts and the fastening of the mesh to the support. The installation can be ordered on the supplier's website https://sitkazahid.com/en/landing/sekciyna-ogorozha or done by hand. For those who want to save money, this is an ideal option. In addition, the procedure is simple and time-saving, so the sectional fence is in high demand.
Therefore, we will take a closer look at the stages of mounting the support of the future fence from the sections. The process consists of the following sequential steps:
1. Marking the territory
When the boundaries of the property have already been determined, the old fence has been dismantled, then you can begin to outline the new one. Thoroughly clean the area of debris, plants, fallen leaves, roots and other vegetation so that nothing interferes with the leveling of the fence. To do this, using a cord or thick thread, lay the pegs strictly in the center of the future support pillar, adhering to the vertical, and stretch it. To do this, it is additionally better to use the building level so that the future support is as even as possible, because otherwise the finished structure will not be installed correctly and will not correspond to the declared anti-vandal characteristics.
2. Drilling holes
Drill holes with a motor-drill, it will be faster, or carefully dig holes with a depth of at least 50 cm, with a diameter of 30 cm. The distance depends on the length of the sections. Standard panels are 2.5 m wide, therefore, depending on the type of fasteners, at a distance of 2.5 to 2.6 m. The depth of the hole depends on the height of the future fence: the higher, the deeper it is needed. Also, the influencing factor is the location of the installation, the colder the climate in the winter season, the deeper the hole is made, and to be more precise, it should be 20-30 cm deeper than the freezing point of the earth.
3. Concreting
The pillars are lowered and concreted. A very simple method, if not for one thing - you need to take into account the composition of the soil. With sandy soil, it is necessary to additionally reinforce the holes, that is, add crushed stone, pebbles, gravel or another type of stone and sand when mixing the concrete solution. This will help to firmly fix the frame one hundred percent. After making sure that they are even, we fix the pillars with a level, namely, we install retaining wooden beams and leave them for several days to dry the concrete.
4. Fastening the net to the posts
Fasten each panel in turn with the fasteners to the post.
A few steps and the fence is ready. Therefore, when choosing a fence, choose a sectional one, because it can be easily installed on your own, saving money, but getting high-quality protection.
