Are you dreaming of a stylish fence that will fit well into the design of your home? Then the choice is obvious - a sectional fence made of welded mesh with https://sitkazahid.com/en/catalog/eco-panels/c292 or without polymer coating will ideally fit into the exterior of your property. Why? After all, it has a number of advantages, such as minimalistic design, long-term warranty in operation and anti-vandal characteristics. But will it be difficult to set up a fence? The process is more complicated than just pulling the netting, but the owner can do it with skillful hands.
.jpg)
To mount a sectional fence made of metal wire, it is advisable to own such tools and materials as:
- manual motor-drill or yamobur;
- screwdriver;
- fittings;
- construction level;
- roulette;
- shovel;
- scrap;
- cord;
- laser level (desirable);
- concrete solution.
If all the tools are prepared, we will read the instructions in detail and get to work. Step-by-step installation steps:
1. Preparation
Before starting installation work, it is necessary to clear the area of foreign objects, trees, plants, roots, debris. A shovel comes in handy at this stage.
2. Markup
Apply the markings strictly in the center of the future pillar according to the level using a tape measure, pegs and a cord. Using a tape measure, mark the angles of rotation of the fence, the location of the posts, the location of the gates and wickets and pull the cord between them to determine the boundaries on the level of the level.
3. Drilling holes
Drill holes under the posts with a motor-drill or a pit-drill at least 50 cm deep, 30 cm wide at a distance of 2.52-2.6 m from each other. The distance depends on the method of fastening with clamps and self-tapping screws or fastening of the "Standard" type to a pole with holes. The size of the hole depends on the height of the future metal fence: the higher, the deeper the hole is made. The depth of soil freezing is also taken into account, so it should be 20-30 cm deeper than the freezing point.
4. Concreting
The pillars are lowered into the hole and concreted. With sandy and loose soil, it is necessary to additionally reinforce the holes, and add gravel and sand to the cement solution before concreting in order to better fix the frame. The upper thread is tensioned with a leveling tool to maintain the desired height along the entire length of the fence. Having made sure of the equality, we fix the pillars with the help of props.
5. Installation of sections
After the concrete has acquired hardness, we proceed to fastening the sections to the pillars with reefs outward using special fasteners. Fixation is carried out using fasteners of the "Standard" type or with clamps of the same shade to the fence. The process is repeated with each panel.
So, only 5 steps and the private territory will be ennobled with a beautiful appearance and protection for decades. You can find out more detailed information about the product and ordering by leaving a request on the website https://sitkazahid.com/en/landing/sekciyna-ogorozha, or leave a request for the installation of a professional team if there is no time for self-installation.
