Swing gates are very popular among consumers, so they are rightly considered a classic, compared with analogues, for example, where the basis is a chain link fence. This option combines the best price and high quality, is used for many years and is easy to install.
The basis for swing gates - galvanized material, mesh wire with a polymer coating in the frame. The design consists of two symmetrical parts, than it is convenient in transportation and installation. The construction will be an ideal addition to the sectional fence and gate, as you can see in the photo below.
Advantages to choose the type of metal swing gate:
- the basis is high-quality metal, which is confirmed by GOST standards;
- high quality components, strong lock;
- the coating protects against corrosion;
- double bar provides anti-vandalism;
- simple installation;
- automated fast welded manufacturing process without damaging the coating;
- the ability to order an individual variety of goods with the desired parameters.
It can be used to cover the passage on the territory of cottages, industrial facilities, commercial buildings, educational institutions, residential high-rise or private houses, country estates.
There is a single standard for building gates from metal rods. The complete set consists of:
- 2 gate sections;
- 2 pillars;
- 2 lower latches;
- 2 plugs;
- handle, lock, core, keys 5 pieces;
- locking bar.
Our company fulfills any wishes of the client concerning a configuration and parameters. Each client has the opportunity to choose the color, as well as the way they will open: inside the area or outside. Installation is easy when compared to sliding gates, where automation is additionally mounted. But for the convenience of the client we provide installation services, so we share the secrets of the installation process:
1. Make the area clean: remove excess debris, vegetation.
2. Take into account the width of the marking, dig 2 holes with a depth of 80 cm under the pillars and level.
3. Tighten the hinges on the posts with the adjustment gap.
4. Install the sash at the bottom of both halves of the structure for the resistance of the gate so that it does not open more than 90 degrees.
5. Concrete the columns.
6. To establish a locking lath of the lock for accurate fixing.
Choose swinging gates made of metal mesh with double rods https://sitkazahid.com/en/catalog/swing-gate/c300 , because they captivated customers with the simplicity of construction and installation, unpretentious care, while remaining a real protector and decoration of the appearance of the site.
