Galvanized metal gates covered with polymer of different colors - the best option for travel to private and industrial areas. Why choose this type? Due to the ease of installation and the availability of protective functions. The sliding mechanism of the gate helps to push the structure to the right or left along the fence or wall, without requiring much space. As a bonus can be equipped with automation and protection system. The effort is minimal, because the movement of the structure provides a special device. This indicates that they harmoniously combine protective and aesthetic functions.
We are engaged in production of gate with a swing or retractable system of opening https://sitkazahid.com/en/catalog/sliding-gates/c301 which under the order it is possible to make to 8 meters of width. Consider a number of their advantages:
- polymer coating - a protective layer against mechanical damage, moisture, rust;
- double horizontal bar - strong protection against vandals;
- certified quality that meets GOST and European standards;
- automated welding without damaging the coating;
- the ability to order unique sizes with the desired parameters and color;
- possibility of mounting additional protection in the form of automation, security systems or alarm systems.
If we talk about the components and structure of the construction, the console kit includes the following components: carriage, megarail, trap, cap, end roller, limiter, bolts, lock, washers and anchor plates. And the scheme of the structure with a triangle on one side - plays an important role in the fixation and movement, which is one third of the length of the base, which you can see in the photo above.
How to make and install sliding gates from metal bars? Make drawings and follow the steps of the step-by-step instructions:
1. Clean the area from debris and vegetation.
2. Level the foundation and dig a ditch 50 cm wide, put reinforcement under the foundation and concrete to ground level.
3. Install the posts with the anchor plates.
4. Fix the base in the holes of the megarail with bolts and close with nuts.
5. Mount metal anchor bolts on a flat base.
6. Fix the rollers in the middle position on the level of the concrete structure.
7. Install limiters so that the finished structure is clearly fixed.
8. In the bottom part to fix a catcher for smooth raising of gate at closing.
9. Install the cap.
10. To mount the motor which needs to be fixed on 4 bolts from inside of gate thanks to what they will carry out movement automatically.
11. Install the motion sensors.
There is no doubt, based on the peculiarities of the structure and basic characteristics, that sliding gates made of metal mesh - it is safe, durable, convenient, and will not cause difficulties in such a process as installation.
