For several decades now, chain-link fences have not lost their popularity among owners of private houses and territories, residential complexes, parking lots, private estates, solar stations, agricultural complexes, small households, summer cottages or gardens. But what if, after serving for ten years, the mesh has corroded? Either buy a new one, or paint the old one, that is, bring the external image of the fence into pre-operational state.
First you need to make a choice of paint on metal surfaces from alkyd, acrylic or enamel to protect against rust on the metal. When planning the process, it should be taken into account that it will not be possible to avoid wasted material due to the structure of the structure, and the first mandatory step will be cleaning the wire from rust with a metal brush and treatment with an anti-corrosion primer and degreasing solution in order for the paint to better lay on the base.
.jpg)
Next, they start staining. There are the following painting methods:
- Brush
The subject has the advantage of being able to reach with paint in difficult places. But this is not the most effective option, because both sides need to be painted in turn with the waste of a large amount of paint, which will simply spill out during the process. The downside is that the fence dries for a long time, which increases the risk of contaminating things, body and pets for a long time after.
2. Roller
It is considered the most effective method, especially when using a roller with a long nap. In addition, if you work with an assistant, you can apply on both sides at the same time. This method will also save on paint.
3. Spray gun
It is considered one of the fastest staining methods, but uneconomical in paint consumption. It should be borne in mind that along with the grid, nearby objects, grass, plants, flowers, buildings will also be colored. Therefore, in order to paint, they put on protective clothing, hold the tool at an inclination of 30-50 degrees, and put a temporary dense shield or a metal sheet on the opposite side.
4. Fur mitten
This option is very popular due to the dyeing of the netting with a fur mitten. To do this, turn it inside out and put it on your hand, and to avoid staining your hands, put on a rubber glove under it. The process is quite simple, because you need to dip your hand in paint and paint. The method guarantees one hundred percent that every cell is colored.
Above, we have introduced methods for painting the netting of the chain-link, but it is still better to buy a net-netting with pvc, plastic coating or galvanized wire https://sitkazahid.com/en/catalog/chain-link-mesh/c279 , or an analogue - a welded mesh in a polymer coating. A well-made mesh from this composition is guaranteed to last 10 years, which will be much cheaper than painting a fence every 2-3 years.
