Hardware stores offer a wide selection of materials for construction and repair, including concrete of different brands, manufacturers, characteristics and, accordingly, cost. But which one is the best to choose to make a concrete pour? The concrete grade M200 or M250 is most suitable if it is planned to pour a reinforcing tape on aerated concrete when erecting the walls of the future house.
Let's take a closer look at the concept of an armored belt https://sitkazahid.com/en/landing/armopoyas. Reinforced tape is a masonry element that must be used as the basis for installing floors between floors, building walls, erecting roofing systems, and a base for a Mauerlat. The design helps to increase the rigidity of the house, its strength and ability to withstand strong winds, soil shrinkage. A belt made of reinforced mesh and concrete helps to redistribute the point load of the bearing surfaces onto an integral frame in order to prevent wall deformation reliably, durable and efficiently.
Concrete is an integral part of masonry. Calculation of the ratio of the proportions of the components of the mixture of the most popular positions, if you want to carry out the production yourself using a concrete mixer:
- М200: cement М400, sand, crushed stone (1: 3: 5);
- М250: cement М400, sand, crushed stone (1: 2: 2).
.jpg)
How to properly pour concrete for an armopoyas?
The air temperature at which you need to fill the armopoyas must be positive. In hot weather, it is important to regularly wet the structure to prevent cracking. Only in this case the structure acquires maximum strength. But plasticizers and additives are always ready to come to the rescue, which accelerate the hardening of cement and help prevent the process of water crystallization.
The pouring process is usually a simple process, but the result of the appearance largely depends on the observance of certain rules. The setting time of concrete during the installation of the armopoyas depends on the weather conditions, air temperature and the brand of mortar.
Professional recommendations for filling reinforced masonry:
- it is recommended to start concreting early in the morning;
- it is necessary to fill with the composition holistically, quickly, without interruption, if the formwork is not filled everywhere, the substance should not have time to harden;
- wait for complete hardening, the formwork can be removed after 3-4 days, but the structure must stand at least 3 weeks;
- the height of the belt must be at least 20 cm;
- the process must be carried out clearly along the horizontal level.
By adhering to simple tips for installing an armored belt, choosing high-quality materials such as reinforcement or reinforced mesh https://sitkazahid.com/en/catalog/armopoyas-grid/c288 and concrete, you will get a solid structure that will withstand earthquakes, earthquakes, strong winds and even hurricanes.
