When purchasing https://sitkazahid.com/en/landing/sitka-rabicya/ chain-link fencing, you must first decide how you will use it. For example, thin galvanised mesh is usually used for fencing. Wire mesh with a large diameter can be used for reinforcing reinforced concrete structures.
When purchasing chain-link fencing, consider the following:
should be a label on the end of the roll indicating the manufacturer's trademark, the size of the mesh and its code designation;
the weight of one roll of chain-link fencing should not exceed 80 kg. Exceptions are meshes with numbers 80 and 100, their permissible weight is 250 kg;
all ends of the spirals near the mesh must be cut evenly and bent towards their spiral;
all cells near the mesh must be even, the average wire diameter may exceed the norm by no more than 6-10%.
Possible deviations
Sometimes the cell size and wire diameter do not correspond to the figures given.
Therefore, when choosing, take into account the permissible limit deviations:
for the mesh size - no more than 10% of the side length,
for the wire diameter - ± 0.06 mm,
for the mesh width - no more than 1.6%,
for the roll length - ± 1.5% (it must be measured when stretched).
The wire must be rigid so that it can be stretched well during installation and operation and sags less.
